If you have any issues with your products; for example, if they break or if they are not performing as promised, then contact us. We will – at our sole discretion – repair or replace any defective uPVC and aluminium windows and doors for free, provided that the issue occurs less than 10 years after the date the item was manufactured.
Please check the reverse of your contract for full terms and conditions, or contact us with a copy of your contract at hand so we can help you work out if you are still under guarantee.
In order to make sure that your new windows and doors last as long as possible, then they will require some simple maintenance to keep them in tip-top condition. With just a little bit of care and attention, it’s easy to keep that “new windows and doors” feeling for years. Below we’ve explained some simple ways to keep your products looking their best, with some helpful tips on care, maintenance and keeping your guarantee valid.
uPVC Care
Taking care of uPVC is really easy
To keep it clean, just wipe it down with warm soapy water. Abrasive products and solvents like glass cleaner, metal polish, and scouring pads may damage gloss finishes or woodgrain effect finishes, so they should be avoided.
If stubborn marks don’t budge, they can be removed with a specialist uPVC cleaner.
To prevent condensation from building up, clear any debris from drainage slots between the bottom of the window and the external sill, and from inside the sashes when the window is open.
Glass Care
Whilst the glass used by us will be of good quality it may feature minor imperfections & blemishes & will be assessed according to Glass & Glazing Federation guidelines.
Just use a non-smear glass cleaner product and a paper towel to keep your glass looking shiny and new.
Spray the cleaner directly onto the glass and into the corners, then wipe down vigorously with the paper towel until it’s nearly gone. Then turn over the paper and buff until dry. For the very best finish, do the same to the outside of the window – until you can see your reflection in it.
External Glass
- Clean every four months
- Keep it grit and grime free with warm soapy water
- Finish with a glass cleaner
- Only use a soft cloth or paper towel.
Internal Glass
- Clean once a month
- Finish with a glass cleaner
- Only use a soft cloth or paper towel.
Hardware
Any metal-to-metal joints that do not have nylon bearings should be lubricated once a year with light engineering oil such as 3-in-1. These joints include friction stays, hinges, espagnolette, gearing mechanisms, shootbolts and locking mechanisms.
Rollers on door bolts, espagnolettes or shootbolt mechanisms that engage with locking keeps should be lubricated once a year with light grease such as lanolin.
How to keep your hardware clean
- Remember to clean your window furniture every four months.
- Use a soft duster or a damp chamois leather to remove dust and dirt
- Superior polishings and coatings eliminate the need for regular polishing and cleaning
- Avoid abrasive products and solvents such as metal polish, scouring pads and acetone.
Cleaning tips
- It’s a good idea to remove all rings, bracelets and watches before cleaning glass to prevent scratching.
- For your safety, never walk on a bay roof or lean a ladder against the frames, glass or guttering. If access is required above a large bay window, tower fixed scaffolding is recommended.
- And remember to use the right cleaning technique for the right part of the window, as outlined below, to keep them looking their best.
Handles
Just wipe with a damp cloth and dry thoroughly to remove dirt and dust.
Seals
Effective weather seals prevent draughts and stop heat escaping from your home. To keep them doing the job well, clean with a damp cloth. If a seal becomes dislodged from its grooves, simply slide them back into position to avoid damage.
Composite Doors
Composite doors work hard to protect you and your home, but it’s not hard to look after them. Here’s how to care for each part of the door:
Door Leaf
Wipe away grime and grit with warm water and dry with a soft cloth.
Door frame
Wash with warm soapy water. Stubborn stains might require specialist uPVC cleaner.
External glass
Wash with warm soapy water and a soft cloth. Finish with a proprietary glass cleaner.
Leaded glass
Wash with warm soapy water and a soft cloth, and finish with a proprietary glass cleaner. Natural oxidation will occur over time.
Hardware
Take a clean cloth and warm water with a mild detergent, then simply wipe clean to a shine. Add light engineering oil such as 3-in-1 to all moving parts, especially if you live near the coast or an industrial site.
Hinges
Lubricate with light engineering oil.
Cylinder locks
Use a Teflon-based lubricant, not oil or graphite powder.
0% APR representative on orders over £3,000
We have various low-cost finance options available. Get a quick quote and apply for finance at the same time.
Happy Customers
Chris Shepherd
We experienced excellent service from quotation to survey to installation. Andy and Tony, the installation team, arrived on time, worked throughout the day, and did a great job. They provided a very high level of customer service.
Michele King
Excellent service from start to finish. Everyone at Rodda and Hocking was helpful and courteous. The three fitters, Gary, Brendan and Scott, did a brilliant job. Would recommend
Pip Trimble
Just had new porch windows and doors fitted. Couldn’t fault the guys fitting them polite professional, and tidy, took all the windows away and left no mess whatsoever. Thanks very much for a job well done.
Anne Smee
We had two of your team members come along to do roof insulation on our conservatory. We were very pleased with their work, and it looks a treat. They cleaned up afterwards and took all the rubbish away. We would certainly recommend this Company to anyone needing this type of work.
Julie Ancell
Had windows, guttering, facias and a small conservatory replaced. Initially, I came and did a quote which was thorough and very competitive. Fitted really well despite very poor weather. Extremely pleased with the finished work; it looks great. Thanks.